New design simulation for a high-altitude dual-balloon system to extend lifetime and improve floating performance

This paper presents a comprehensive simulation for a high-altitude dual-balloon system which consists of zero- and super-pressure balloons. Preliminary calculations were established to describe the basic concept of the new integrated system. A mathematical model was investigated to simulate the ascending and floating processes which considered the atmospheric conditions and thermodynamic variations. Based on the simulation, results showed that the floating altitude stability between daytime and nighttime was improved. This integrated system supports higher floating altitude levels than those of ordinary balloons and extends the lifetime of floating balloon systems. Moreover, results demonstrated that the integrated system was lighter than ordinary balloons, saving useful weight for effective payload. Furthermore, exploiting the advantages of both kinds of balloons while avoiding the difficulties was a significant goal in the current design to promote the floating performance of high-altitude balloons technology.     

Aerodynamic optimization design for high pressure turbines based on the adjoint approach

A first study on the continuous adjoint formulation for aerodynamic optimization design of high pressure turbines based on S2surface governed by the Euler equations with source terms is presented.The objective function is defined as an integral function along the boundaries,and the adjoint equations and the boundary conditions are derived by introducing the adjoint variable vectors.The gradient expression of the objective function then includes only the terms related to physical shape variations.The numerical solution of the adjoint equation is conducted by a finitedifference method with the Jameson spatial scheme employing the first and the third order dissipative fluxes.A gradient-based aerodynamic optimization system is established by integrating the blade stagger angles,the stacking lines and the passage perturbation parameterization with the quasi-Newton method of Broyden–Fletcher–Goldfarb–Shanno(BFGS).The application of the continuous adjoint method is validated through a single stage high pressure turbine optimization case.The adiabatic efficiency increases from 0.8875 to 0.8931,whilst the mass flow rate and the pressure ratio remain almost unchanged.The optimization design is shown to reduce the passage vortex loss as well as the mixing loss due to the cooling air injection.     

太阳能热推进系统效率分析

太阳能热推进采用小分子量气体作为推进剂可以获取800～900 s高比冲,但提高推进系统的换热效率是目前亟待解决的问题.本研究建立了太阳能热推进系统主要部件的基本分析模型,在利用有限单元法进行热分析的基础上,对系统在多种工况下的相关参数进行了计算,分析了各部件主要参数对提高太阳能热推进系统热效率和推进效率的影响,得出了系统效率在不同工作状态下的变化规律,并提出了提高系统效率的措施.     

变形飞行器建模及控制方法研究综述

针对变形飞行器的发展现状、气动建模、动力学建模以及控制方法研究进行了综述。首先阐述了变形飞行器的定义及变形需求,再从四个方面梳理了变形飞行器的技术优势。针对不同的机翼变形方式,对飞行器各种变形技术的特点及发展现状进行了详细的分析与总结;将变形飞行器与固定外形飞行器的气动机理进行了对比分析,并对变形飞行器的动力学建模方法进行了梳理,总结了各种方法的特点;结合变形飞行器自身特性分析了飞行控制的特点及难点,并详细阐述了各类变形飞行器的控制研究进展。最后总结分析了变形飞行器的发展趋势：深化基础理论与技术研究,从材料、结构及控制等领域全方面朝着智能化方向发展,最终实现变形飞行器的工程化、自主化、智能化应用。     

高超声速飞行器气动热耗散、输运及转换技术研究进展

针对高超声速飞行器面临的严重气动热集中、累积和时变问题,从气动热耗散、输运和转换三个方面,分别论述了被动热耗散材料、结构和主动热耗散技术,基于高导热材料、热管和工质对流的热输运技术,以及再生转换和热电转换技术的研究现状及其在高超声速飞行器上的应用案例,提出了上述技术在面临高超声速气动热时存在的问题。最后,针对高超声速飞行器气动热耗散、输运和转换技术的发展趋势进行了展望。     

温度对油—气式起落架缓冲性能的影响研究

油—气式缓冲器内部的油液特性及充气压力会随环境温度而变化,进而影响起落架的缓冲性能。为了探究温度对油—气式起落架缓冲性能的影响,在起落架落震试验的基础上,提出一种缓冲器环境温度模拟方法,并分析油—气式起落架缓冲器在20~80℃环境温度下的缓冲性能。结果表明：在所研究的温度范围内,缓冲器初始充气压力对温度变化敏感,随着温...     

多尾鳍仿生航行器推进性能的三维数值研究

采用格子波尔兹曼方法及浸没边界法,发展了一套适用于自由游动的三维数值研究程序。进而以多尾鳍推进仿生航行器为原型,讨论了尾鳍数目、形状、材料刚度等构型参数及振幅、频率等尾鳍摆动参数对推进性能的影响。结果表明对称布置、反对称摆动的双尾鳍能够明显消除侧向力而避免航行器主体的横向晃动,且推力大于两个单独尾鳍的简单加和;在中等Reynolds数下,具有波动性质的柔性尾鳍不论是推进速度还是推进效率均优于刚性尾鳍;当尾鳍单纯摆动推进时,具有完整鳍面的半椭圆形尾鳍的推进性能优于后部有缺口的深叉形尾鳍。     

周向平均方法在某风扇/增压级分析中的应用简

 通过对三维（3D）Navier-Stokes方程进行周向平均,得到了通流模型的控制方程,对其采用时间推进有限体积方法进行数值求解。为实现风扇/增压级在设计初期的快速性能评估,考察了周向平均方法在风扇/增压级分析中的准确性。分别利用NUMECA三维数值模拟软件和周向平均通流模型（CAM）对某高通流风扇/增压级进行了性能分析,从对比结果来看,周向平均通流模型在近设计点给出了与三维数值模拟十分接近的特性参数,最大误差不超过2.0%。在风扇转子中,由于周向平均通流模型能捕获通道激波,其物理本质与三维平均结果有所区别,因此径向参数分布与三维有所差异。而在亚声速流动下的增压级及外涵道各叶片排出口参数的径向分布与三维数值模拟结果都能很好地吻合。     

静子叶栅安装角异常非定常流场数值研究

为了研究静子叶栅安装角异常对叶栅通道流场的影响,利用商业软件NUMECA对二维叶栅某个叶片安装角增加5°不同攻角进行非定常流场数值模拟,得到了因安装角异常导致叶栅通道堵塞时对叶栅通道内的流场结构及叶片载荷的影响。结果表明,安装角调节5°时,在正攻角下,随着攻角的增大叶栅通道内流动不断恶化,吸力面出现大面积的附面层分离;负攻角时,气流比较平稳,但是漩涡脱落频率高达3500Hz。分析发现,安装角异常时攻角对漩涡尺度和脱落频率影响较大,其中叶片动态气动力脉动量迅速增大,可能是导致发动机叶片疲劳破坏的原因之一。     

Attitude control system design and on-orbit performance analysis of nano-satellite––‘‘Tian Tuo 1’’

‘‘Tian Tuo 1'(TT-1) nano-satellite is the first single-board nano-satellite that was successfully launched in China. The main objective of TT-1 is technology demonstration and scientific measurements. The satellite carries out the significant exploration of single-board architecture feasibility validation, and it is tailored to the low-cost philosophy by adopting numerous commercialoff-the-shelf(COTS) components. The satellite is featured with three-axis stabilization control capability. A pitch bias momentum wheel and three magnetic coils are adopted as control actuators.The sun sensors, magnetometers and a three-axis gyro are employed as the measurement sensors.The quaternion estimator(QUEST) and unscented Kalman filter(UKF) method are adopted for the nano-satellite attitude determination. On-orbit data received by ground station is conducted to analysis the performance of attitude determination and control system(ADCS). The results show that the design of ADCS for TT-1 is suitable, robust and feasible.